OUR EQUIPMENT
Pipe Cutter ID System
Can-Ab’s powerful 60,000 psi Pipe Cutter ID cuts steel pipes and cemented casing from the inside in one pass.
Built for reliable operation in remote locations, the Can-Ab Pipe Cutter ID cuts without heat or flames, making it a safer alternative for oil and gas field applications, including plug and abandonment. Additional applications include cutting pilings and other structures that require downhole cutting.
The Pipe Cutter ID features a circle cutter assembly that mounts to the pipe or casing with a flange plate. A centering tool makes it fast and easy to install and ensures an even cut. Cutting is performed with Can-Ab’s Permalign® ID abrasivejet cutting head which has been designed especially for ID pipe cutting applications
Sizes
* 4-14” ID (100-355 mm)
Pipe flange bolt pattern of 10-14 inches (255-355 mm)
* 4-20” ID (100–510 mm)
Pipe flange bolt pattern of 20-30 inches (510-760 mm).
Maximum Operating Depth: 13 foot (4 m)
Can be customized to 20 foot (6 m) depth
Permalign ID Abrasive Head
Weight: 4 lb (1.8 kg)
Water pressure (max): 60,000 psi (4100 bar)
Max Flow Rate: 4.4 gpm (16.65 lpm) at 55,000 PSI (3800 bar)
Abrasive Delivery (Max): 3 lb (1.36 kg)/minute
Orifice range: .014- .030 in (0.35-0.76 mm)
Nozzle ID: 0.045, 0.065 or 0.095 in (1.14, 1.65 or 12.4 mm)
Nozzle Length: 2, 3, or 4 inches (50, 75, 100 mm)
Required Equipment
* A mobile intensifier pump to supply UHP water
* Air compressor to supply abrasive hopper
* Hydraulic power to operate support equipment (hydraulic configuration only)
* Water source
* Orifices and nozzles to shape UHP water stream
* Abrasive
Abrasive
Grit size: 30–200 mesh
Connection: 3/8 inch polyethyene tubing
Flow: 3 lb/min (1.36 kg/min)
Air Supply
Pneumatic configuration: Pressure: 90–120 psi (6.2–8.3 bar)
Flow: 100 cfm (47 L/s)
Hydraulic configuration:
Pressure: 80–90 psi (5.5–6.2 bar) Flow: minimal
Environmental
Ambient temperature: 50º–95º F (10º–35º C)
Relative humidity: Non condensing, maximum 95% at 95ºF (35ºC)
Altitude: Up to 3000 feet (1000 m)
Hydraulic Supply
Pressure: 1000 psi (70 bar) nominal;
1500 psi (100 bar) maximum
Flow: 10 gpm (38 L/min)
Hydraulic configuration only
UHP Water Supply
60,000 psi (4100 bar) maximum
Can-Ab Intensifier Pump
The Pipe Cutter ID is powered by a Can-Ab waterjet intensifier pump.
Featuring the The Permalign® ID
Abrasivejet Cutting Head!
Canadian Abandonment Mini-Hydro-Vac
Canadian Abandonment Model 55-250 DX Mobile Intensifier Pump
Canadian Abandonment Backhoe
